How much does a stainless steel chimney cost to install – and how can you save?
A stainless steel chimney is one of the most durable investments you can make in your home, but costs can vary considerably. This guide explains what determines the price, what installation by a specialist usually costs and why OSKAR lets you avoid this expense in most cases.
What determines the price of a stainless steel chimney?
The total price depends on several factors: the nominal diameter, the required height, whether you need a single-wall or twin-wall system, and accessories such as wall brackets, a chimney terminal or rain cap. The more components your individual system requires, the higher the material cost – but you also receive a system tailored precisely to your appliance.
Material costs at a glance
Depending on the height and diameter, the material alone for a twin-wall system usually costs from a few hundred to around two thousand euros. Shorter indoor renovation solutions are often at the lower end of this range, while taller external wall systems with a larger diameter require more components and therefore cost more.
How much extra does specialist installation cost?
With most suppliers, installation by a specialist adds to the material cost. Depending on the height, scaffolding requirements and structural conditions – such as a wall or roof penetration – quotations including installation often add several hundred to over a thousand euros. For larger systems several metres high, total prices of several thousand euros including installation are also not uncommon in individual cases.
A conventional specialist installer will charge these costs regardless of how simple or complex the chimney system actually is to install.
Why OSKAR deliberately does not offer installation
OSKAR deliberately supplies the materials only, without an installation service. The reason is that our SAS-TEC system was designed from the outset for installation without tools or a specialist installer. Simply fit the components together, connect them with a gentle anticlockwise turn and secure them with a locking band – done. For most of our customers, this eliminates the very cost that often makes up the largest part of other suppliers’ quotations.
Safety first: what you still need to consider
Although installing an OSKAR system is straightforward, you must still consult the district chimney sweep responsible for your area, as required by law. They must check your plans in advance and formally approve the completed system afterwards. Depending on the federal state and type of installation – such as a roof penetration or a chimney exceeding a certain height – you may also need planning permission. It is best to discuss this with your chimney sweep early on, before starting the installation.
Conclusion
The total cost of a stainless steel chimney consists of the materials plus, with most suppliers, installation. Because the OSKAR SAS-TEC system is designed for self-installation, you can usually avoid this second expense without compromising on quality or safety: all systems are tested by TÜV-SÜD to DIN EN 1856-1 and covered by OSKAR Care+ for up to 30 years.
With the OSKAR Configurator, you can find the right system for your home in just a few clicks, with transparent material costs and no hidden installation fee.
